How do I make a textbox that only accepts numbers?

I have a windows forms app with a textbox control that I want to only accept integer values. In the past I've done this kind of validation by overloading the KeyPress event and just removing characters which didn't fit the specification. I've looked at the MaskedTextBox control but I'd like a more general solution that could work with perhaps a regular expression, or depend on the values of other controls.

Ideally this would behave such that pressing a non numeric character would either produce no result or immediately provide the user with feedback about the invalid character.

Answers:

you could use TextChanged/ Keypress event, use a regex to filter on numbers and take some action.

Answers:

Try a MaskedTextBox. It takes a simple mask format so you can limit the input to numbers or dates or whatever.

Answers:

I am assuming from context and the tags you used that you are writing a .NET C# app. In this case, you can subscribe to the text changed event, and validate each key stroke.

private void textBox1_TextChanged(object sender, EventArgs e)
{
    if (System.Text.RegularExpressions.Regex.IsMatch(textBox1.Text, '[^0-9]'))
    {
        MessageBox.Show('Please enter only numbers.');
        textBox1.Text = textBox1.Text.Remove(textBox1.Text.Length - 1);
    }
}

Answers:

Two options:

1. Use a NumericUpDown instead. NumericUpDown does the filtering for you, which is nice. Of course it also gives your users the ability to hit the up and down arrows on the keyboard to increment and decrement the current value.

2. Handle the appropriate keyboard events to prevent anything but numeric input. I've had success with this two event handlers on a standard TextBox:

   private void textBox1_KeyPress(object sender, KeyPressEventArgs e)
   {
       if (!char.IsControl(e.KeyChar) && !char.IsDigit(e.KeyChar) &&
           (e.KeyChar != '.'))
       {
               e.Handled = true;
       }
   
       // only allow one decimal point
       if ((e.KeyChar == '.') && ((sender as TextBox).Text.IndexOf('.') > -1))
       {
           e.Handled = true;
       }
   }
   

You can remove the check for '.' (and the subsequent check for more than one '.') if your TextBox shouldn't allow decimal places. You could also add a check for '-' if your TextBox should allow negative values.

If you want to limit the user for number of digit, use: textBox1.MaxLength = 2; // this will allow the user to enter only 2 digits

Answers:

Take a look at Input handling in WinForm

I have posted my solution which uses the ProcessCmdKey and OnKeyPress events on the textbox. The comments show you how to use a Regex to verify the keypress and block/allow appropriately.

Answers:

I have made something for this on CodePlex.

It works by intercepting the TextChanged event. If the result is a good number it will be stored. If it is something wrong, the last good value will be restored. The source is a bit too large to publish here, but here is a link to the class that handles the core of this logic.

Answers:

And just because it's always more fun to do stuff in one line...

 private void textBox1_KeyPress(object sender, KeyPressEventArgs e)
    {
        e.Handled = !char.IsDigit(e.KeyChar) && !char.IsControl(e.KeyChar);
    }

NOTE: This DOES NOT prevent a user from Copy / Paste into this textbox. It's not a fail safe way to sanitize your data.

Answers:

Sorry to wake the dead, but I thought someone might find this useful for future reference.

Here is how I handle it. It handles floating point numbers, but can easily be modified for integers.

Basically you can only press 0 - 9 and .

You can only have one 0 before the .

All other characters are ignored and the cursor position maintained.

    private bool _myTextBoxChanging = false;

    private void myTextBox_TextChanged(object sender, EventArgs e)
    {
        validateText(myTextBox);
    }

    private void validateText(TextBox box)
    {
        // stop multiple changes;
        if (_myTextBoxChanging)
            return;
        _myTextBoxChanging = true;

        string text = box.Text;
        if (text == '')
            return;
        string validText = '';
        bool hasPeriod = false;
        int pos = box.SelectionStart;
        for (int i = 0; i < text.Length; i++ )
        {
            bool badChar = false;
            char s = text[i];
            if (s == '.')
            {
                if (hasPeriod)
                    badChar = true;
                else
                    hasPeriod = true;
            }
            else if (s < '0' || s > '9')
                badChar = true;

            if (!badChar)
                validText += s;
            else
            {
                if (i <= pos)
                    pos--;
            }
        }

        // trim starting 00s
        while (validText.Length >= 2 && validText[0] == '0')
        {
            if (validText[1] != '.')
            {
                validText = validText.Substring(1);
                if (pos < 2)
                    pos--;
            }
            else
                break;
        }

        if (pos > validText.Length)
            pos = validText.Length;
        box.Text = validText;
        box.SelectionStart = pos;
        _myTextBoxChanging = false;
    }

Here is a quickly modified int version:

    private void validateText(TextBox box)
    {
        // stop multiple changes;
        if (_myTextBoxChanging)
            return;
        _myTextBoxChanging = true;

        string text = box.Text;
        if (text == '')
            return;
        string validText = '';
        int pos = box.SelectionStart;
        for (int i = 0; i < text.Length; i++ )
        {
            char s = text[i];
            if (s < '0' || s > '9')
            {
                if (i <= pos)
                    pos--;
            }
            else
                validText += s;
        }

        // trim starting 00s 
        while (validText.Length >= 2 && validText.StartsWith('00')) 
        { 
            validText = validText.Substring(1); 
            if (pos < 2) 
                pos--; 
        } 

        if (pos > validText.Length)
            pos = validText.Length;
        box.Text = validText;
        box.SelectionStart = pos;
        _myTextBoxChanging = false;
    }

Answers:

int Number;
bool isNumber;
isNumber = int32.TryPase(textbox1.text, out Number);

if (!isNumber)
{ 
    (code if not an integer);
}
else
{
    (code if an integer);
}

Answers:

You can use the TextChanged event

private void textBox_BiggerThan_TextChanged(object sender, EventArgs e)
{
    long a;
    if (! long.TryParse(textBox_BiggerThan.Text, out a))
    {
        // If not int clear textbox text or Undo() last operation
        textBox_LessThan.Clear();
    }
}

Answers:

This might be useful. It allows 'real' numeric values, including proper decimal points and preceding plus or minus signs. Call it from within the related KeyPress event.

       private bool IsOKForDecimalTextBox(char theCharacter, TextBox theTextBox)
    {
        // Only allow control characters, digits, plus and minus signs.
        // Only allow ONE plus sign.
        // Only allow ONE minus sign.
        // Only allow the plus or minus sign as the FIRST character.
        // Only allow ONE decimal point.
        // Do NOT allow decimal point or digits BEFORE any plus or minus sign.

        if (
            !char.IsControl(theCharacter)
            && !char.IsDigit(theCharacter)
            && (theCharacter != '.')
            && (theCharacter != '-')
            && (theCharacter != '+')
        )
        {
            // Then it is NOT a character we want allowed in the text box.
            return false;
        }



        // Only allow one decimal point.
        if (theCharacter == '.'
            && theTextBox.Text.IndexOf('.') > -1)
        {
            // Then there is already a decimal point in the text box.
            return false;
        }

        // Only allow one minus sign.
        if (theCharacter == '-'
            && theTextBox.Text.IndexOf('-') > -1)
        {
            // Then there is already a minus sign in the text box.
            return false;
        }

        // Only allow one plus sign.
        if (theCharacter == '+'
            && theTextBox.Text.IndexOf('+') > -1)
        {
            // Then there is already a plus sign in the text box.
            return false;
        }

        // Only allow one plus sign OR minus sign, but not both.
        if (
            (
                (theCharacter == '-')
                || (theCharacter == '+')
            )
            && 
            (
                (theTextBox.Text.IndexOf('-') > -1)
                ||
                (theTextBox.Text.IndexOf('+') > -1)
            )
            )
        {
            // Then the user is trying to enter a plus or minus sign and
            // there is ALREADY a plus or minus sign in the text box.
            return false;
        }

        // Only allow a minus or plus sign at the first character position.
        if (
            (
                (theCharacter == '-')
                || (theCharacter == '+')
            )
            && theTextBox.SelectionStart != 0
            )
        {
            // Then the user is trying to enter a minus or plus sign at some position 
            // OTHER than the first character position in the text box.
            return false;
        }

        // Only allow digits and decimal point AFTER any existing plus or minus sign
        if  (
                (
                    // Is digit or decimal point
                    char.IsDigit(theCharacter)
                    ||
                    (theCharacter == '.')
                )
                &&
                (
                    // A plus or minus sign EXISTS
                    (theTextBox.Text.IndexOf('-') > -1)
                    ||
                    (theTextBox.Text.IndexOf('+') > -1)
                )
                &&
                    // Attempting to put the character at the beginning of the field.
                    theTextBox.SelectionStart == 0
            )
        {
            // Then the user is trying to enter a digit or decimal point in front of a minus or plus sign.
            return false;
        }

        // Otherwise the character is perfectly fine for a decimal value and the character
        // may indeed be placed at the current insertion position.
        return true;
    }

Answers:

3 solution

1)

//Add to the textbox's KeyPress event
//using Regex for number only textBox

private void txtBox_KeyPress(object sender, KeyPressEventArgs e)
{
if (!System.Text.RegularExpressions.Regex.IsMatch(e.KeyChar.ToString(), '\d+'))
e.Handled = true;
}

2) an another solution from msdn

// Boolean flag used to determine when a character other than a number is entered.
private bool nonNumberEntered = false;
// Handle the KeyDown event to determine the type of character entered into the     control.
private void textBox1_KeyDown(object sender, KeyEventArgs e)
{
// Initialize the flag to false.
nonNumberEntered = false;
// Determine whether the keystroke is a number from the top of the keyboard.
if (e.KeyCode < Keys.D0 || e.KeyCode > Keys.D9)
{
    // Determine whether the keystroke is a number from the keypad.
    if (e.KeyCode < Keys.NumPad0 || e.KeyCode > Keys.NumPad9)
    {
        // Determine whether the keystroke is a backspace.
        if (e.KeyCode != Keys.Back)
        {
            // A non-numerical keystroke was pressed.
            // Set the flag to true and evaluate in KeyPress event.
            nonNumberEntered = true;
        }
    }
}

}

private void textBox1_KeyPress(object sender, KeyPressEventArgs e)
{
    if (nonNumberEntered == true)
    {
       MessageBox.Show('Please enter number only...'); 
       e.Handled = true;
    }
}

source http://msdn.microsoft.com/en-us/library/system.windows.forms.control.keypress(v=VS.90).aspx

3) using the MaskedTextBox: http://msdn.microsoft.com/en-us/library/system.windows.forms.maskedtextbox.aspx

Answers:

Here is a simple standalone Winforms custom control, derived from the standard TextBox, that allows only System.Int32 input (it could be easily adapted for other types such as System.Int64, etc.). It supports copy/paste operations and negative numbers:

public class Int32TextBox : TextBox
{
    protected override void OnKeyPress(KeyPressEventArgs e)
    {
        base.OnKeyPress(e);

        NumberFormatInfo fi = CultureInfo.CurrentCulture.NumberFormat;

        string c = e.KeyChar.ToString();
        if (char.IsDigit(c, 0))
            return;

        if ((SelectionStart == 0) && (c.Equals(fi.NegativeSign)))
            return;

        // copy/paste
        if ((((int)e.KeyChar == 22) || ((int)e.KeyChar == 3))
            && ((ModifierKeys & Keys.Control) == Keys.Control))
            return;

        if (e.KeyChar == '')
            return;

        e.Handled = true;
    }

    protected override void WndProc(ref System.Windows.Forms.Message m)
    {
        const int WM_PASTE = 0x0302;
        if (m.Msg == WM_PASTE)
        {
            string text = Clipboard.GetText();
            if (string.IsNullOrEmpty(text))
                return;

            if ((text.IndexOf('+') >= 0) && (SelectionStart != 0))
                return;

            int i;
            if (!int.TryParse(text, out i)) // change this for other integer types
                return;

            if ((i < 0) && (SelectionStart != 0))
                return;
        }
        base.WndProc(ref m);
    }

Update 2017: My first answer has some issues:

• you can type something that's longer than an integer of a given type (for example 2147483648 is greater than Int32.MaxValue);
• more generally, there's no real validation of the result of what has been typed;
• it only handles int32, you'll have to write specific TextBox derivated control for each type (Int64, etc.)

So I came up with another version that's more generic, that still supports copy/paste, + and - sign, etc.

public class ValidatingTextBox : TextBox
{
    private string _validText;
    private int _selectionStart;
    private int _selectionEnd;
    private bool _dontProcessMessages;

    public event EventHandler<TextValidatingEventArgs> TextValidating;

    protected virtual void OnTextValidating(object sender, TextValidatingEventArgs e) => TextValidating?.Invoke(sender, e);

    protected override void WndProc(ref Message m)
    {
        base.WndProc(ref m);
        if (_dontProcessMessages)
            return;

        const int WM_KEYDOWN = 0x100;
        const int WM_ENTERIDLE = 0x121;
        const int VK_DELETE = 0x2e;

        bool delete = m.Msg == WM_KEYDOWN && (int)m.WParam == VK_DELETE;
        if ((m.Msg == WM_KEYDOWN && !delete) || m.Msg == WM_ENTERIDLE)
        {
            DontProcessMessage(() =>
            {
                _validText = Text;
                _selectionStart = SelectionStart;
                _selectionEnd = SelectionLength;
            });
        }

        const int WM_CHAR = 0x102;
        const int WM_PASTE = 0x302;
        if (m.Msg == WM_CHAR || m.Msg == WM_PASTE || delete)
        {
            string newText = null;
            DontProcessMessage(() =>
            {
                newText = Text;
            });

            var e = new TextValidatingEventArgs(newText);
            OnTextValidating(this, e);
            if (e.Cancel)
            {
                DontProcessMessage(() =>
                {
                    Text = _validText;
                    SelectionStart = _selectionStart;
                    SelectionLength = _selectionEnd;
                });
            }
        }
    }

    private void DontProcessMessage(Action action)
    {
        _dontProcessMessages = true;
        try
        {
            action();
        }
        finally
        {
            _dontProcessMessages = false;
        }
    }
}

public class TextValidatingEventArgs : CancelEventArgs
{
    public TextValidatingEventArgs(string newText) => NewText = newText;
    public string NewText { get; }
}

For Int32, you can either derive from it, like this:

public class Int32TextBox : ValidatingTextBox
{
    protected override void OnTextValidating(object sender, TextValidatingEventArgs e)
    {
        e.Cancel = !int.TryParse(e.NewText, out int i);
    }
}

or w/o derivation, use the new TextValidating event like this:

var vtb = new ValidatingTextBox();
...
vtb.TextValidating += (sender, e) => e.Cancel = !int.TryParse(e.NewText, out int i);

but what's nice is it works with any string, and any validation routine.

Answers:

I would handle it in the KeyDown event.

void TextBox_KeyDown(object sender, KeyEventArgs e)
        {
            char c = Convert.ToChar(e.PlatformKeyCode);
            if (!char.IsDigit(c))
            {
                e.Handled = true;
            }
        }

Answers:

This is exactly what the Validated/Validating events were designed for.

Here's the MSDN article on the topic: http://msdn.microsoft.com/en-us/library/system.windows.forms.control.validating.aspx

The TL;DR version: check the .Text property in the Validating event and set e.Cancel=True when the data is invalid.

When you set e.Cancel=True, the user can't leave the field, but you will need to give them some kind of feedback that something's wrong. I change the box's background color to light red to indicate a problem. Make sure to set it back to SystemColors.Window when Validating is called with a good value.

Answers:

In button click you can check text of textbox by for loop:

char[] c = txtGetCustomerId.Text.ToCharArray();
bool IsDigi = true;

for (int i = 0; i < c.Length; i++)
     {
       if (c[i] < '0' || c[i] > '9')
      { IsDigi = false; }
     }
 if (IsDigi)
    { 
     // do something
    }

Answers:

This one works with copy and paste, drag and drop, key down, prevents overflow and is pretty simple

public partial class IntegerBox : TextBox 
{
    public IntegerBox()
    {
        InitializeComponent();
        this.Text = 0.ToString();
    }

    protected override void OnPaint(PaintEventArgs pe)
    {
        base.OnPaint(pe);
    }

    private String originalValue = 0.ToString();

    private void Integerbox_KeyPress(object sender, KeyPressEventArgs e)
    {
        originalValue = this.Text;
    }

    private void Integerbox_TextChanged(object sender, EventArgs e)
    {
        try
        {
            if(String.IsNullOrWhiteSpace(this.Text))
            {
                this.Text = 0.ToString();
            }
            this.Text = Convert.ToInt64(this.Text.Trim()).ToString();
        }
        catch (System.OverflowException)
        {
            MessageBox.Show('Value entered is to large max value: ' + Int64.MaxValue.ToString(), 'Error', MessageBoxButtons.OK, MessageBoxIcon.Error);
            this.Text = originalValue;
        }
        catch (System.FormatException)
        {                
            this.Text = originalValue;
        }
        catch (System.Exception ex)
        {
            this.Text = originalValue;
            MessageBox.Show(ex.Message, 'Error', MessageBoxButtons.OK , MessageBoxIcon.Error);
        }
    }       
}

Answers:

Simpler answer:

_textBox.TextChanged += delegate(System.Object o, System.EventArgs e)
{
    TextBox _tbox = o as TextBox;
    _tbox.Text = new string(_tbox.Text.Where(c => (char.IsDigit(c)) || (c == '.')).ToArray());
};

Answers:

private void txt3_KeyPress(object sender, KeyPressEventArgs e)
{
    for (int h = 58; h <= 127; h++)
    {
        if (e.KeyChar == h)             //58 to 127 is alphabets tat will be         blocked
        {
            e.Handled = true;
        }
    }
    for(int k=32;k<=47;k++)
    {
        if (e.KeyChar == k)              //32 to 47 are special characters tat will 
        {                                  be blocked
            e.Handled = true;
        }
    }
}

try this is very simple

Answers:

Hi you can do something like this in the textchanged event of the textbox.

here is a demo

    private void textBox1_TextChanged(object sender, EventArgs e)
    {
        string actualdata = string.Empty;
        char[] entereddata = textBox1.Text.ToCharArray();
        foreach (char aChar in entereddata.AsEnumerable())
        {
            if (Char.IsDigit(aChar))
            {
                actualdata = actualdata + aChar;
                // MessageBox.Show(aChar.ToString());
            }
            else
            {
                MessageBox.Show(aChar + ' is not numeric');
                actualdata.Replace(aChar, ' ');
                actualdata.Trim();
            }
        }
        textBox1.Text = actualdata;
    }

Answers:

FAIL-SAFE and simple 'recursive' method, which can be used with multiple textboxes.

It blocks the wrong keyboard typed characters and also pasted values etc. It only accepts integer numbers, and the maximum number length is the maximum length of a string type (which is int, really long!)

public void Check_If_Int_On_TextChanged(object sender, EventArgs e)
{
   // This method checks that each inputed character is a number. Any non-numeric
   // characters are removed from the text

   TextBox textbox = (TextBox)sender;

   // If the text is empty, return
   if (textbox.Text.Length == 0) { return; }

   // Check the new Text value if it's only numbers
   byte parsedValue;
   if (!byte.TryParse(textbox.Text[(textbox.Text.Length - 1)].ToString(), out parsedValue))
   {
      // Remove the last character as it wasn't a number
      textbox.Text = textbox.Text.Remove((textbox.Text.Length - 1));

      // Move the cursor to the end of text
      textbox.SelectionStart = textbox.Text.Length;
    }
 }

Answers:

It seems like many of the current answers to this question are manually parsing the input text. If you're looking for a specific built-in numeric type (e.g. int or double), why not just delegate the work to that type's TryParse method? For example:

public class IntTextBox : TextBox
{
    string PreviousText = '';
    int BackingResult;

    public IntTextBox()
    {
        TextChanged += IntTextBox_TextChanged;
    }

    public bool HasResult { get; private set; }

    public int Result
    {
        get
        {
            return HasResult ? BackingResult : default(int);
        }
    }

    void IntTextBox_TextChanged(object sender, EventArgs e)
    {
        HasResult = int.TryParse(Text, out BackingResult);

        if (HasResult || string.IsNullOrEmpty(Text))
        {
            // Commit
            PreviousText = Text;
        }
        else
        {
            // Revert
            var changeOffset = Text.Length - PreviousText.Length;
            var previousSelectionStart =
                Math.Max(0, SelectionStart - changeOffset);

            Text = PreviousText;
            SelectionStart = previousSelectionStart;
        }
    }
}

If you want something more generic but still compatible with Visual Studio's Designer:

public class ParsableTextBox : TextBox
{
    TryParser BackingTryParse;
    string PreviousText = '';
    object BackingResult;

    public ParsableTextBox()
        : this(null)
    {
    }

    public ParsableTextBox(TryParser tryParse)
    {
        TryParse = tryParse;

        TextChanged += ParsableTextBox_TextChanged;
    }

    public delegate bool TryParser(string text, out object result);

    public TryParser TryParse
    {
        set
        {
            Enabled = !(ReadOnly = value == null);

            BackingTryParse = value;
        }
    }

    public bool HasResult { get; private set; }

    public object Result
    {
        get
        {
            return GetResult<object>();
        }
    }

    public T GetResult<T>()
    {
        return HasResult ? (T)BackingResult : default(T);
    }

    void ParsableTextBox_TextChanged(object sender, EventArgs e)
    {
        if (BackingTryParse != null)
        {
            HasResult = BackingTryParse(Text, out BackingResult);
        }

        if (HasResult || string.IsNullOrEmpty(Text))
        {
            // Commit
            PreviousText = Text;
        }
        else
        {
            // Revert
            var changeOffset = Text.Length - PreviousText.Length;
            var previousSelectionStart =
                Math.Max(0, SelectionStart - changeOffset);

            Text = PreviousText;
            SelectionStart = previousSelectionStart;
        }
    }
}

And finally, if you want something fully generic and don't care about Designer support:

public class ParsableTextBox<T> : TextBox
{
    TryParser BackingTryParse;
    string PreviousText;
    T BackingResult;

    public ParsableTextBox()
        : this(null)
    {
    }

    public ParsableTextBox(TryParser tryParse)
    {
        TryParse = tryParse;

        TextChanged += ParsableTextBox_TextChanged;
    }

    public delegate bool TryParser(string text, out T result);

    public TryParser TryParse
    {
        set
        {
            Enabled = !(ReadOnly = value == null);

            BackingTryParse = value;
        }
    }

    public bool HasResult { get; private set; }

    public T Result
    {
        get
        {
            return HasResult ? BackingResult : default(T);
        }
    }

    void ParsableTextBox_TextChanged(object sender, EventArgs e)
    {
        if (BackingTryParse != null)
        {
            HasResult = BackingTryParse(Text, out BackingResult);
        }

        if (HasResult || string.IsNullOrEmpty(Text))
        {
            // Commit
            PreviousText = Text;
        }
        else
        {
            // Revert
            var changeOffset = Text.Length - PreviousText.Length;
            var previousSelectionStart =
                Math.Max(0, SelectionStart - changeOffset);

            Text = PreviousText;
            SelectionStart = previousSelectionStart;
        }
    }
}

Answers:

simply use this code in textbox :

private void textBox1_TextChanged(object sender, EventArgs e)
{

    double parsedValue;

    if (!double.TryParse(textBox1.Text, out parsedValue))
    {
        textBox1.Text = '';
    }
}

Answers:

I've been working on a collection of components to complete missing stuff in WinForms, here it is: Advanced Forms

In particular this is the class for a Regex TextBox

/// <summary>Represents a Windows text box control that only allows input that matches a regular expression.</summary>
public class RegexTextBox : TextBox
{
    [NonSerialized]
    string lastText;

    /// <summary>A regular expression governing the input allowed in this text field.</summary>
    [Browsable(false), EditorBrowsable(EditorBrowsableState.Never)]
    [DesignerSerializationVisibility(DesignerSerializationVisibility.Hidden)]
    public virtual Regex Regex { get; set; }

    /// <summary>A regular expression governing the input allowed in this text field.</summary>
    [DefaultValue(null)]
    [Category('Behavior')]
    [Description('Sets the regular expression governing the input allowed for this control.')]
    public virtual string RegexString {
        get {
            return Regex == null ? string.Empty : Regex.ToString();
        }
        set {
            if (string.IsNullOrEmpty(value))
                Regex = null;
            else
                Regex = new Regex(value);
        }
    }

    protected override void OnTextChanged(EventArgs e) {
        if (Regex != null && !Regex.IsMatch(Text)) {
            int pos = SelectionStart - Text.Length + (lastText ?? string.Empty).Length;
            Text = lastText;
            SelectionStart = Math.Max(0, pos);
        }

        lastText = Text;

        base.OnTextChanged(e);
    }
}

Simply adding something like myNumbericTextBox.RegexString = '^(\d+|)$'; should suffice.

Answers:

i like terse code

    private void xmm_textbox_KeyPress(object sender, KeyPressEventArgs e) {
        double x;
        e.Handled = !double.TryParse(((TextBox)sender).Text, out x);
    }

Answers:

I was also looking for the best way to check only numbers in textbox and problem with keypress was it does not support copy paste by right click or clipboard so came up with this code which validates the when cursor leaves the text field and also it checks for empty field. (adapted version of newguy)

private void txtFirstValue_MouseLeave(object sender, EventArgs e)
{
    int num;
    bool isNum = int.TryParse(txtFirstValue.Text.Trim(), out num);

    if (!isNum && txtFirstValue.Text != String.Empty)
    {
        MessageBox.Show('The First Value You Entered Is Not a Number, Please Try Again', 'Invalid Value Detected', MessageBoxButtons.OK, MessageBoxIcon.Error);
        txtFirstValue.Clear();
    }
}

Answers:

In our webpage with the definition of textbox we can add an onkeypress event for accepting only numbers. It will not show any message but it will prevent you from wrong input. It worked for me, user could not enter anything except number.

<asp:TextBox runat='server' ID='txtFrom'
     onkeypress='if(isNaN(String.fromCharCode(event.keyCode))) return false;'>

Answers:

Do not forget that a user can paste an invalid text in a TextBox.

If you want to restrict that, follow the below code:

private void ultraTextEditor1_TextChanged(object sender, EventArgs e)
{
    string append='';
    foreach (char c in ultraTextEditor1.Text)
    {
        if ((!Char.IsNumber(c)) && (c != Convert.ToChar(Keys.Back)))
        {

        }
        else
        {
            append += c;
        }
    }

    ultraTextEditor1.Text = append;
}   

Answers:

Here is a simple solution that works for me.

public static bool numResult;
    public static bool checkTextisNumber(string numberVal)
    {
        try
        {
            if (numberVal.Equals('.'))
            {
                numResult = true;
            }
            else if (numberVal.Equals(''))
            {
                numResult = true;
            }
            else
            {
                decimal number3 = 0;
                bool canConvert = decimal.TryParse(numberVal, out number3);
                if (canConvert == true)
                {
                    numResult = true;
                }
                else
                    numResult = false;
            }

        }
        catch (System.Exception ex)
        {
            numResult = false;
        }
        return numResult;
    }
    string correctNum;
    private void tBox_NumTester_TextChanged(object sender, TextChangedEventArgs e)
    {


        if(checkTextisNumber(tBox_NumTester.Text))
        {
            correctNum = tBox_NumTester.Text;
        }
        else
        {
            tBox_NumTester.Text = correctNum;
        }

    }

Answers:

Just use a NumericUpDown control and set those ugly up down buttons visibility to false.

numericUpDown1.Controls[0].Visible = false;

NumericUpDown is actually a collection of controls containing a 'spin box' (up down buttons), a text box and some code to validate and wange-jangle it all together.

Marking:

YourNumericUpDown.Controls[0].visible = false 

will hide the buttons while keeping the underlying code active.

While not being an obvious solution it is simple and effective. .Controls[1] would hide the text box portion if you wanted to do that instead.

Answers:

Both integers and floats need to be accepted, including the negative numbers.

private void textBox1_KeyPress(object sender, KeyPressEventArgs e)
{
    // Text
    string text = ((Control) sender).Text;

    // Is Negative Number?
    if (e.KeyChar == '-' && text.Length == 0)
    {
        e.Handled = false;
        return;
    }

    // Is Float Number?
    if (e.KeyChar == '.' && text.Length > 0 && !text.Contains('.'))
    {
        e.Handled = false;
        return;
    }

    // Is Digit?
    e.Handled = (!char.IsDigit(e.KeyChar) && !char.IsControl(e.KeyChar));
}

Answers:

I had created a Re-Usable Textbox Extension class for all sorts of validations and thought about sharing it.

All you need to do is raise a TextChange event and then call the Validate method. It looks like this:

private void tbxAmount_TextChanged(object sender, EventArgs e)
{ 
    tbxAmount.Validate(TextValidator.ValidationType.Amount);
}

Here is the extension class:

public static class TextValidator
{
    public enum ValidationType
    {
        Amount,
        Integer
    }

    /// <summary>
    /// Validate a textbox on text change.
    /// </summary>
    /// <param name='tbx'></param>
    /// <param name='validationType'></param>
    public static void Validate(this TextBox tbx, ValidationType validationType)
    {
        PerformValidation(tbx, validationType);
        tbx.Select(tbx.Text.Length, 0);
    }


    private static void PerformValidation(this TextBox tbx, ValidationType validationType)
    {
        char[] enteredString = tbx.Text.ToCharArray();
        switch (validationType)
        {
            case ValidationType.Amount:
                tbx.Text = AmountValidation(enteredString);
                break;

            case ValidationType.Integer:
                tbx.Text = IntegerValidation(enteredString);
                break;

            default:
                break;
        }

        tbx.SelectionStart = tbx.Text.Length;
    }



    private static string AmountValidation(char[] enteredString)
    {
        string actualString = string.Empty;
        int count = 0;
        foreach (char c in enteredString.AsEnumerable())
        {
            if (count >= 1 && c == '.')
            { actualString.Replace(c, ' '); actualString.Trim(); }
            else
            {
                if (Char.IsDigit(c))
                {
                    actualString = actualString + c;
                }

                if (c == '.')
                {
                    actualString = actualString + c; count++;
                }

                else
                {
                    actualString.Replace(c, ' ');
                    actualString.Trim();
                }
            }
        }
        return actualString;
    }


    private static string IntegerValidation(char[] enteredString)
    {
        string actualString = string.Empty;
        foreach (char c in enteredString.AsEnumerable())
        {
            if (Char.IsDigit(c))
            {
                actualString = actualString + c;
            }
            else
            {
                actualString.Replace(c, ' ');
                actualString.Trim();
            }
        }
        return actualString;
    }
}

You can find the full code here

Answers:

This is my aproach:

1. using linq (easy to modify filter)
2. copy/paste proof code
3. keeps caret position when you press a forbidden character
4. accepts left zeroes

5. and any size numbers

   private void numeroCuenta_TextChanged(object sender, EventArgs e)
   {
       string org = numeroCuenta.Text;
       string formated = string.Concat(org.Where(c => (c >= '0' && c <= '9')));
       if (formated != org)
       {
           int s = numeroCuenta.SelectionStart;
           if (s > 0 && formated.Length > s && org[s - 1] != formated[s - 1]) s--;
           numeroCuenta.Text = formated;
           numeroCuenta.SelectionStart = s;
       }
   }
   

Answers:

Using the approach described in Fabio Iotti's answer I have created a more generic solution:

public abstract class ValidatedTextBox : TextBox {
    private string m_lastText = string.Empty;
    protected abstract bool IsValid(string text);
    protected sealed override void OnTextChanged(EventArgs e) {
        if (!IsValid(Text)) {
            var pos = SelectionStart - Text.Length + m_lastText.Length;
            Text = m_lastText;
            SelectionStart = Math.Max(0, pos);
        }
        m_lastText = Text;
        base.OnTextChanged(e);
    }
}

'ValidatedTextBox', which contains all nontrivial validation behavior. All that's left to do is inherit from this class and override 'IsValid' method with whatever validation logic is required. For example, using this class, it is possible to create 'RegexedTextBox' which will accept only strings which match specific regular expression:

public abstract class RegexedTextBox : ValidatedTextBox {
    private readonly Regex m_regex;
    protected RegexedTextBox(string regExpString) {
        m_regex = new Regex(regExpString);
    }
    protected override bool IsValid(string text) {
        return m_regex.IsMatch(Text);
    }
}

After that, inheriting from the 'RegexedTextBox' class, we can easily create 'PositiveNumberTextBox' and 'PositiveFloatingPointNumberTextBox' controls:

public sealed class PositiveNumberTextBox : RegexedTextBox {
    public PositiveNumberTextBox() : base(@'^d*$') { }
}

public sealed class PositiveFloatingPointNumberTextBox : RegexedTextBox {
    public PositiveFloatingPointNumberTextBox()
        : base(@'^(d+' + CultureInfo.CurrentCulture.NumberFormat.NumberDecimalSeparator + @')?d*$') { }
}

Answers:

Working solution for WPF & a simple TextChangedEventArgs.

private void TextBox_TextChanged(object sender, TextChangedEventArgs e)
{
    var TextBox = (sender as TextBox);

    // if not a numeric value, remove news characters
    if (Regex.IsMatch(TextBox.Text, '[^0-9]'))
    {
        foreach (TextChange Change in e.Changes)
        {
            TextBox.Text = TextBox.Text.Remove(Change.Offset, Change.AddedLength);

            TextBox.CaretIndex = Change.Offset;
        }
    }
}

Answers:

you can simply prevent adding non-numerical chars by this simple code

 if (long.TryParse(TextBox.Text,out long isparsable))
        {
          // your code to handle numbers
        }
        else
        {
            TextBox.Text='Only Numbers Allowed';
            TextBox.Focus();
            TextBox.SelectAll();
        }

Answers:

Use a RegularExpressionValidator:

<asp:TextBox ID="TextBoxNum" runat="server"></asp:TextBox><br />
<asp:RegularExpressionValidator ID="RegularExpressionValidator1"
                        ControlToValidate="TextBoxNum" runat="server"
                        ErrorMessage="Only numbers allowed"
                        ValidationExpression="d+">
</asp:RegularExpressionValidator>

Answers: